BIONX G2 throttle Modewith sliding aid

Item number

Price inclusive 19% Tax plus shipping

  • shipping DE --> DE/AT 3-5 working days
  • shipping DE --> EU 3-10 working days
In stock


The BionX shock aid is easy to retrofit and can be mounted optionally on the left or right of the handlebars. It will help you start off the mountain or push the wheel.

Press the red button to push the engine gently. If you need more power, for example, when you start at the mountain, press the button firmly. In addition to the red gas push button, there are also 2 buttons (+ and -) for setting the current support level.

You can also adjust the support level using the buttons on the throttle lever instead of the console. The BionX throttle lever is simply connected to the brake sensor port of the G2 console. The previously connected brake sensor is in turn connected to the throttle lever and, of course, maintains its function. The BionX throttle lever only has a push-and-start assistance function (up to 6 km / h).

It is only possible to control the engine up to the maximum speed of 25 km / h using the throttle only for handbikes and certain applications. It is a BionX gas lever, pushing aid or also a proximity control element (Throttle Mode).


The BionX throttle lever is only compatible with the BionX G2 brackets. A conversion from the classic console to the G2 is possible.

Please note that the slider must often be activated first. This works as follows:

The slider is simply activated via the G2 console. Press the One button and the Minus button at the same time until a countdown runs. In the countdown, press the push button a few times - done.

manufacturer: BionX GmbH 

scope of application: Throttle lever or proximity switch, Throttle Module

mounting Type: right or left side

color: black

special features:


original part of BionX company

Simple push or start

on the mountain

Battery Power No
Deal of the Week No
Size No